Three small blades compared by what they ask of your hand: grip length, scabbard fit, cast fittings at 60–90 mm, and what a yoroidoshi was built to...
GlobalGallery
Display Setups: Light, Dust and Scale
A practical guide to display setups: controlling light, dust and humidity, and giving pieces an honest scale.

Contents
By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026
The photograph that stays with us: a beautiful sealed cabinet, a row of 1/6 pieces inside, and a fine mist of condensation on every blade. The collector lived in a humid city, sealed the case in summer, and opened it for the first time in November. Nothing was wrong with the pieces. The setup was quietly spending their future.
Display is not the opposite of storage; it is storage you can see. The three enemies are light, dust and instability; the three tools are control, enclosure and honesty about scale. This is the practical version — the advice we give in care emails every week, and the museum practice behind it at a budget a collector can copy.

Light: The Slowest Enemy
Light damages objects in two distinct ways, and confusing them is a common mistake. The visible light you need in order to see the piece by also drives the chemical reactions that fade dyed textiles, darken lacquer, and weaken organic materials such as leather and wood. The ultraviolet component is the more aggressive of the two and does damage even at low levels, which is why curators treat it as a pollutant rather than as light at all. The harm is cumulative and irreversible: a faded colour does not come back, and a cracked lacquer does not heal. Museums therefore limit light on sensitive materials to a low lux level — often around 50 lux for things like textiles, leather and lacquered surfaces — precisely because what matters is the total ‘dose’ over the object’s whole life, not how bright it looks today.
You do not need a museum permit to apply the principle at home. Keep pieces out of direct sunlight, and if a shelf sits in a sunny room, move it or fit a UV-filtering film to the window glass; ordinary glass blocks surprisingly little UV, so film or UV-acrylic is the real fix. For the artificial light you do use, favour LEDs rated for low UV output and a high colour-rendering index (CRI, ideally 90 or above) so colours read true without pumping up the wattage. A small, well-diffused spotlight at about 45 degrees shows the form of a helmet or the lines of a blade without scorching the surface, and a simple rule — lights on only when you are actually looking — cuts the total dose dramatically. A cheap lux meter app on a phone will tell you what level you are actually running, which is usually a useful shock. Rotating which pieces are on show, and giving the rest a rest in the dark, is exactly how institutions stretch an object’s useful life, and it is free.
The Getty Conservation Institute publishes approachable guidance on light, environment and storage that any collector can follow before spending a penny on fittings. The single most useful habit it encourages is thinking in decades: a piece displayed brightly for twenty years is a different object at the end of them than one kept mostly in the dark, and the difference is the one you cannot photograph after the fact.

Dust, Pollutants and Relative Humidity
Dust is not just ugly; it is slightly abrasive, it traps moisture against a surface, and it carries airborne pollutants that accelerate corrosion on ferrous metal and tarnish on silver. The cheap, effective answer is enclosure. A sealed acrylic or glass case with a close-fitting lid keeps most dust out and, just as importantly, lets you control the air inside it. Acrylic sold for display use is available with a UV-filtering additive, which deals with the light problem and the dust problem in one pane, and a case also stops curious hands from adding a new layer of skin oil to the patina every time someone ‘just picks it up’.
Humidity is the other half of the air story. Mixed collections of steel, leather, wood and lacquer are happiest in a stable, moderate relative humidity — a commonly recommended band sits around 45 to 55 per cent — and the real enemy is swing, not a single number. Rapid changes make different materials expand and contract at different rates, loosening joins, cracking finishes and encouraging ‘housekeeper’s tackle’ — the fine cross-pattern corrosion that appears on neglected steel. A case with a small amount of conditioned silica gel, checked and recharged seasonally, smooths those swings far better than leaving a piece on an open shelf above a radiator. Watch the neighbours too: untreated wood, wool and especially rubber off-gas acids that travel through the air, so keep saving materials like original boxes, foam and rubber bands well away from the objects themselves.
For long-term peace of mind, the Canadian Conservation Institute issues free technical bulletins on environmental guidelines that any collector can follow. The recurring lesson is boring and true: stability beats heroics. A steady 50 per cent humidity with filtered air and no sunlight will preserve more than any miracle polish ever invented, and it costs almost nothing to maintain once the case is built.

Scale and Supports
A piece displayed at the wrong scale looks either toy-like or lost. The fix is to give it a believable context: a sword on a proper stand reads as a sword, the same sword leaning in a corner reads as clutter, and a miniature on a shelf with no reference looks like a paperweight. Use purpose-made supports — brass or acrylic hangers for blades, shaped cradles for helmets, small armatures for armour — and never force a piece onto a support that does not fit; pressure points are exactly where finishes crack and where thin metal fatigues. A helmet resting on its rim, unsupported, will eventually take a flat spot on the sweetest part of the bowl, and a blade clamped too tightly will take a witness mark you cannot undo.
Acid-free materials matter wherever a surface touches the support. Bare oak, newsprint and many cheap foams leach acids and stain over time, so use conservation-grade board and inert plastics at every contact point, and pad the rests with a soft, inert cloth so the weight is spread rather than concentrated. Scale models and mannequins earn their place by showing proportion: a miniature cuirass on a small torso, or a sidearm next to a coin for size, tells the viewer the real dimensions without a written note. If you collect miniature arms and armour specifically, the scale itself is the point, so a consistent reference — the same ruler, the same stand, the same background — across your shelf turns a row of objects into a coherent display rather than a rummage. The discipline is the same one a museum mount-maker uses, just at a smaller budget.

Four questions our care emails ask every week
After a piece ships, most of what we hear falls into four buckets. The answers are short, so they are worth having in one place.
“My cabinet fogs up inside.” A sealed case traps the air that was in it; when the room cools overnight, that air dumps its moisture on the steel. Vent the case, put a small amount of silica gel inside and recharge it seasonally, and open the case monthly. A cabinet that breathes is safer than one that is perfectly closed.
“The shelf sits above a radiator.” Move the shelf. Rising warm air is the driest, most oscillating environment in the room — it dries wood and leather and pushes steel through swing after swing. No wax or oil routine survives it; distance is the only fix.
“Dust keeps settling on the open shelf.” A soft dry brush or a microfibre cloth, dusted regularly rather than scrubbed rarely. Dust is mildly abrasive and holds moisture against the surface, so the goal is to keep the layer thin, never to let it build and then attack it.
“I handled it bare-handed and now there are marks.” Skin oil etches gilt and shows forever on dark resin. Going forward: gloves for handling, a wipe with a lightly oiled cloth after a handling session, and a thin coat of microcrystalline wax as the seal. The marks that are already there can be reduced, rarely removed — which is the honest version of the advice.
Putting a Corner Together
A good display corner is planned, not accumulated. Group by a theme you actually care about — one war, one region, one maker — rather than by whatever fitted the shelf that week, and let the lighting and the labels carry the story. A small printed card with the piece’s name, date and a one-line note turns a silent object into a sentence, and a short label is far more memorable than a wall of unlabeled steel. Keep the cards acid-free and the ink stable; some inks and some papers yellow and, worse, transfer their acid to whatever they rest against.
Rotation is the discipline that ties the three enemies together. No single piece should bear the full dose of light, dust and handling forever. Put a few out, rest the rest, and swap them on a schedule you can actually keep — seasonally is plenty for most collectors, and even annually is better than never. Enclosed, UV-filtered, humidity-buffered and rotated: that is the whole recipe, and none of it is expensive. A simple inventory note of what is on display and when also helps with insurance and with spotting a problem — a new spot of rust or a loosened joint — before it spreads. The point of a display is not to show off; it is to let you live with your collection without quietly spending its future. Post a photo of your own corner in the thread and tell us what you changed after reading this — the board is better the more of us compare notes, and the next reader may solve the exact problem you are stuck on.
The Royal Armouries show the care that goes into a single historic helmet — light cleaning, a protective coating and careful handling are the institutional version of the home display discipline described here.
FAQ
What humidity should a display case be?
A stable 45–55 per cent relative humidity. The real enemy is swing, not any single number: rapid changes make steel, wood and lacquer move at different rates and loosen joins. Silica gel, recharged seasonally, smooths most homes' swings.
Are LED spotlights safe for miniatures?
LEDs rated for low UV output with a CRI of 90 or above, positioned at about 45 degrees and at least thirty centimetres away, are what we recommend. What they replace matters more: direct sunlight and incandescent spots close to the piece do cumulative, irreversible damage.
How often should I rotate pieces on display?
Seasonally is plenty. Light damage is cumulative over an object's whole life, so rotation is free preservation: the pieces on show share the dose instead of one paying it forever.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.
Keep reading in the Miniature Armor Library
- Japanese Armour: Ōyoroi, Dō and Tosei Gusoku
- Collection Stories: What a Collection Says About Its Owner
- New Acquisitions: How to Photograph a Piece Properly
- Myth vs Evidence: 'Damascus Steel' and What Metallurgy Says
- Armor vs Armor: Mail, Lamellar and Plate in Their Own Contexts
Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.
Join the Discussion
Have a question, correction, historical reference or collector insight? Join the discussion below.
Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.
No replies yet
Be the first to add a question, a correction or a collector insight about this topic.