EuropeHistorical Weapons

Halberd and Poleaxe: The Polearms That Beat Armour

Halberd versus poleaxe: shaft length, head mass, socket construction and the fight books that show how each was used against plate armour.

Halberd and Poleaxe: The Polearms That Beat Armour
Halberd and Poleaxe: The Polearms That Beat Armour

By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026

A halberd and a poleaxe are both long sticks with an axe on the end, and they are not the same weapon. One is an infantry weapon built to be issued in hundreds and used in ranks. The other is a knightly weapon built for single combat between two armoured men. The heads look similar in a photograph; the shafts, the balance and the way they were fought give them away.

Both exist because of plate armour. Once a man could cover most of his body in hardened steel, the sword stopped being the answer to him. What worked instead was a weapon that could do three things: concentrate force into a small point, apply that force at the end of a long lever, and hook and control the opponent's weapon while you did it.

Halberd head, iron, mounted
The head of a halberd. Three elements share one socket: a broad axe blade, a fluke or hook on the back, and a square spike on top. Each of the three solves a different problem. (image: Unknown authorUnknown author, CC BY 4.0)

Halberd: the infantry answer

The halberd's head combines an axe blade for cutting, a hook or fluke for pulling, and a spike for thrusting. The shaft is long — commonly between about 1.8 and 2.5 metres — and the whole weapon is designed to be used by men standing close together. The hook is not decoration: against cavalry it can catch a rider's armour, reins or horse furniture and pull him out of the saddle.

The association with the Swiss is not romantic. Halberd-armed infantry broke armoured cavalry at Morgarten in 1315 and were decisive again at Sempach in 1386. Those victories were not the result of a wonder weapon; they were the result of men trained to use a long weapon in formation on ground that did not suit horses, against an enemy who had to come uphill.

Halberds at the Styrian Armoury
Halberds racked at the Styrian Armoury in Graz. The uniformity is the point: these were stored as issue weapons, not collected as objects, and the rack shows how many could be kept ready. (image: Dennis G. Jarvis, CC BY-SA 2.0)

Poleaxe: the knight's own weapon

Pollaxe head, Metropolitan Museum of Art
A pollaxe head in the Metropolitan Museum of Art. The word comes from poll, meaning head: an axe, a hammer or beak, and a spike, mounted on a shaft with a butt cap at the other end. (image: Wikimedia Commons, CC0)

The poleaxe — also spelled pollaxe — is shorter, usually between about 1.2 and 1.8 metres, and its head is a compact combination of axe, hammer or beak, and a top spike. It is a weapon for fighting in armour, and the surviving fight books treat it as the most important knightly weapon on foot.

Fiore dei Liberi's early fifteenth-century manuscript shows plays with the poleaxe in armour; the Middle English Le Jeu de la Hache is devoted to it entirely. The techniques are not swinging contests. They are lever work: strike with the spike, hook with the beak, use the butt end to control distance, and close to wrestle when the shafts cross.

Pollaxe combat, Fiore dei Liberi, Getty manuscript
Poleaxe plays from Fiore dei Liberi's manuscript. Note the hand positions: on both figures the hands are far apart on the shaft, one near the head and one near the butt, because the weapon is used as a lever as much as an axe. (image: Fiore Furlan dei Liberi da Premariacco (Italian, about 1340/1350 - before 1450) , Public domain)

The difference that matters

Put the two side by side and the distinction is use, not shape. A halberd is a formation weapon: long shaft, relatively light head, designed to be held in two hands alongside other men with the same weapon. A poleaxe is a duelling weapon: shorter, heavier at the head, balanced so it can be recovered after a strike, and fitted with a butt spike because the reverse end is used as often as the front.

Head mass explains the rest. A halberd head can be thin, because the energy comes from the whole formation moving forward and from the length of the lever. A poleaxe head is compact and thick, because it has to survive hitting plate armour repeatedly without folding, and because the man using it expects to fight for minutes, not seconds.

Pollaxe with wooden shaft and side ring, Metropolitan Museum of Art
A complete pollaxe with its shaft. The side ring protects the hand, the butt cap balances the head, and the whole object is shorter than a halberd by roughly half a metre — the difference between formation and single combat. (image: Wikimedia Commons, CC0)

Did polearms end the knight?

Not on their own. Knights in full plate were defeated by combined arms: disciplined infantry that could hold ground, missile troops that could disrupt a formation, and terrain that took away the cavalry's advantage. The halberd was one part of that equation, and the poleaxe was the weapon knights themselves carried when they had to fight on foot.

The more accurate statement is that plate armour changed the economics of the battlefield. A man in full harness was expensive; a man with a halberd and three weeks of drill was not. Once infantry could reliably stop cavalry, the proportion of the army that needed to be armoured dropped, and the weapons designed around armoured single combat became specialist equipment rather than the centre of the system.

Making one at 1:6

Shafts are the problem. A 2 m halberd becomes 33 cm at 1:6, and a 33 cm shaft in the wrong material looks like a dowel. We use a tapered hardwood shaft, then fit the head with a socket that actually wraps the wood rather than sitting on top of it. The socket is the detail that separates a miniature from a toy: on originals, the head is held by a socket and two langets running down the shaft, and all of that is visible.

Edges need restraint. A halberd's axe blade is thin at the edge and thick at the socket, with a visible transition. If the miniature is modelled as a flat plate, the light does not change across the blade and it reads as a cut-out. We file a bevel on both faces and leave the socket area thick, which is what the originals do.

A practical comparison of the pollaxe and the halberd — what separates them, how they are held, and why the shaft length changes the way the weapon works:

Reading one in a case

Measure the shaft if the label lets you. Under about 1.8 metres, with a compact head and a butt spike, it is probably a poleaxe. Over 2 metres, with a broad axe blade and a hook, it is a halberd. Then look at the socket: a halberd head is usually socketed and langeted onto the shaft, while a poleaxe head often has a more complex mounting with side rings and a rear spike.

Our guide to yari, naginata and tonbogiri covers the Japanese polearms, which solve the same problems with a very different vocabulary. The Royal Armouries' collection has both European types in depth.

Is a poleaxe the same as a halberd?

No. A poleaxe is a shorter knightly weapon for armoured single combat; a halberd is a longer infantry weapon with a broad axe blade and hook, used in formation.

Why does a poleaxe have a spike on the butt?

Because the reverse end is used. Fight books show strikes and shoves with the butt, and the spike makes that end dangerous as well as useful for control.

Were halberds effective against plate armour?

Against a fully armoured man, the spike and the hook matter more than the axe edge. The blade is for limbs and for unarmoured targets; the spike finds gaps.

Keep reading in the Miniature Armor Library

Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.


The two weapons tell you what kind of fight you are looking at. A halberd on a rack means an army, a formation and a drill book. A poleaxe in a case with a knight's harness means a man who expected to meet another man in armour, at close range, with no formation to help him. Same principle, different world.

Pieces in this guide

MA
Hong Kong Miniature Armor Co. Ltd.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.

Join the Discussion

Have a question, correction, historical reference or collector insight? Join the discussion below.

Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.

No replies yet

Be the first to add a question, a correction or a collector insight about this topic.

Post a Reply

Replies use Shopify's native article comments — nothing is stored outside your store.

Your email is never published.

Your comment will appear after review.