EuropeArmor

Jousting Armour: Reinforcing Plates and the Lance

Why jousting armour looks nothing like field armour: grandguard and passguard, lance rest, frog-mouth helm, ash lances, horse armour and how the sport ended.

Jousting Armour: Reinforcing Plates and the Lance
Jousting Armour: Reinforcing Plates and the Lance

By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026

Jousting armour is not field armour with a shinier finish. It is a different machine, built for one impact arriving from one direction. The left side is thicker, the helmet has no forward eye slit, and there is a bracket bolted to the breastplate to carry the lance. Everything is arranged around the fact that the wearer will be hit on the left breast by a moving object at closing speed.

That is why a jousting harness looks odd next to a battle harness. The shoulders are asymmetric, the arm on the lance side is locked almost rigid, and the head sits inside a box rather than a helmet. Once you understand the geometry of the impact, the shapes stop looking strange and start looking inevitable.

Heavy jousting armour of Archduke Maximilian I, c. 1485
Heavy jousting armour made for Archduke Maximilian I by Lorenz Helmschmid in Augsburg about 1485, now in the Cleveland Museum of Art. The left side is reinforced; the right carries the lance rest. (image: Tim Evanson from Cleveland Heights, Ohio, USA, CC BY-SA 2.0)

Jousting armour: a harness that only does one thing

Four pieces define the type. The grandguard is a bolt-on plate covering the left shoulder and upper chest, sitting proud of the main harness with a gap that helps spread the impact. The passguard reinforces the left elbow; the manifer is a rigid, oversized gauntlet for the bridle hand, which is held forward and cannot be moved out of the way. And the lance rest — the arrêt — is a hooked bracket on the right side of the breastplate that stops the lance sliding back on impact and lets the whole torso carry the load instead of the arm.

The breastplate itself is often noticeably thicker on the left. A jousting cuirass may be 3 mm or more on the lance side against 1.5 to 2 mm on the right, because there is only one direction from which a serious hit is coming.

Armour for man and horse, northern Italy, c. 1575
Armour for man and horse with the Völs-Colonna arms, northern Italy, about 1575. The horse's armour is as carefully fitted as the rider's: the joust was a two-body problem. (image: Geoffrey.landis, CC BY 4.0)

The helmet is a box, not a face

A jousting helm — the frog-mouthed or Stechhelm form — is a heavy, closed steel box that sits on the shoulders and is strapped down at the back. There is no forward-facing eye slit. The wearer looks out through a narrow horizontal gap near the top, which means he rides with his head tipped forward and sees the opponent late.

That sounds like a design failure and is in fact a solution to splinters. A lance that breaks on a breastplate throws fragmented ash forward and upward, and a conventional visor with a sight slit is exactly where those fragments end up. A frog-mouth helm deflects them over the top. The loss of vision is the price, and the tilt barrier — the wooden fence between the two riders, introduced in the fifteenth century — partly compensates by keeping the horses from colliding.

Padding of a tournament helmet, 1484
The fibre-filled linen padding of a tournament helmet, 1484. The steel took the blow; the padding is what stopped the head from ringing. (image: Unknown, Innsbruck, 1484., CC BY 3.0)

The lance is a consumable

A jousting lance is a tapered ash pole three to four metres long, with a steel tip and a conical hand guard called a vamplate. In the joust of peace the tip is blunt or crowned; in the joust of war it is sharp. The lance is designed to break, and it usually does: the point of the exercise is to score a hit and shatter, not to spear a man out of the saddle.

Breaking a lance on the opponent's shield or grandguard scored points; unhorsing him scored more. A rider carried several lances and a spare horse, and the jousting armour he wore was maintained by a staff, and the whole event ran on a schedule of passes with armourers and saddlers standing by. In that sense a tournament was closer to a modern motorsport weekend than to a battle, and the tournament armour worn there was a specialised machine with a service life measured in passes.

The Westminster Tournament Challenge, 1511
The invitation to the Westminster Tournament of 1511, held to celebrate the birth of Prince Henry. Jousting was a court event with printed programmes and a scoring system. (image: British Library, CC BY-SA 4.0)

Horses were armoured too

The horse wore its own harness: a shaffron over the face, a peytral across the chest, a crupper over the hindquarters and a crinet along the neck. Tournament horse armour tends to be heavier and more decorative than field equipment, and it is often the most painted and etched part of a surviving ensemble, because the horse was the most visible element of a knight's status.

It is also the part most often lost. Leather strapping perishes, plates are separated from their mounts, and a peytral in a museum case is frequently the only survivor of a set that once included crinet and crupper. When you see a horse armour display, check whether the pieces were made as a set or assembled from different harnesses — the decoration usually gives it away.

History Hit at the Royal Armouries tiltyard, from the armour and the tilt to a full-contact pass:

Why it ended

Jousting survived the decline of armour because it was never really about warfare. It was a spectacle, a status display and a training ground for horsemanship, and it adapted: lighter armour for the foot combat, specialised helms for different joust forms, and elaborate allegorical staging in the sixteenth century.

The end came from risk management rather than technology. Henry II of France died in 1559 after a splinter from a broken lance entered his visor, and that accident accelerated a shift toward the carrousel and the ring tilt — pageants where the collision was removed. The armour followed the sport: what survives from the seventeenth century is parade equipment, not impact equipment.

Making one at 1:6

The grandguard is the piece that makes a miniature read as a jousting harness rather than a battle harness, and it is also the piece most often omitted. Build it as a separate plate with a visible standoff from the breastplate, and bolt it with two or three domed rivets. The lance rest is the second tell: a small hook on the right breast, angled up, with a strap point below it.

For the helm, resist the urge to add a face. The whole character of a frog-mouth is the blank front and the narrow sight slot high up, and a miniature with a visor looks like a tournament costume rather than a working harness.

Reading one in a case

Check symmetry first: a jousting harness is deliberately asymmetric, and a symmetric one is either field armour or a Victorian assembly. Then look for mounting holes and empty rivet holes on the breastplate — they mark where a grandguard and lance rest were once fitted. Then look at the helm: a frog-mouth with no forward sight is unambiguous.

For the field harness it grew out of, see our guide to the full harness and the step-by-step on putting armour on. The Royal Armouries holds the largest group of jousting armour in the world, and the Met has several complete ensembles.

Why is jousting armour asymmetric?

Because the impact always comes from the left. The left side gets thicker plate and bolt-on reinforcements; the right side carries the lance rest and needs to stay mobile.

Why does a jousting helm have no eye slit?

To keep out lance splinters. The sight is a narrow slot high on the face, so the wearer looks out with the head tipped forward and sees the opponent late.

What is a lance rest for?

It hooks the lance to the breastplate so the impact is carried by the torso rather than the hand, and it stops the lance sliding backward on contact.

Did jousting lances have sharp tips?

Both existed. The joust of peace used a blunt or crowned tip and was the common tournament form; the joust of war used a sharp point and was closer to battlefield practice.

Keep reading in the Miniature Armor Library

Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.


Jousting armour is the most specialised object in the collection: a harness that cannot walk, cannot see forward and cannot raise its left arm, built to survive four seconds of one specific event. Read it that way and every strange plate has a reason.

Pieces in this guide

MA
Hong Kong Miniature Armor Co. Ltd.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.

Join the Discussion

Have a question, correction, historical reference or collector insight? Join the discussion below.

Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.

No replies yet

Be the first to add a question, a correction or a collector insight about this topic.

Post a Reply

Replies use Shopify's native article comments — nothing is stored outside your store.

Your email is never published.

Your comment will appear after review.