EuropeSwords

Viking Sword: Petersen Types and Pattern-Welded Blades

Viking swords explained: blade proportions, the wide fuller, Petersen's hilt typology, pattern welding, Ulfberht steel, and what graves actually preserve.

Viking Sword: Petersen Types and Pattern-Welded Blades
Viking Sword: Petersen Types and Pattern-Welded Blades

By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026

The Viking sword was not invented in Scandinavia. It is a continental European sword that Norse-speaking people adopted, carried, traded and buried in extraordinary numbers. The blade shapes, the hilt forms and even the steel came from the Frankish world and beyond; what the North added was volume, burial custom and a poetry that has followed the object ever since.

That matters for identification. A sword found in a Norwegian grave is not necessarily made in Norway, and the finest blades in Norse hands were often imports. The object is a European sword of the ninth to eleventh centuries, used by people we call Vikings.

Viking-Age swords displayed with detached hilt parts
Two Viking-Age swords displayed with detached pommels and hilt fittings. Graves often yield the parts separated like this, which is why hilt typologies were built from loose components as much as from complete swords. (image: Silar, CC BY-SA 4.0)

The shape of a Viking sword

A typical Viking sword is a double-edged blade around 70 to 80 cm long, with a broad fuller running most of its length, a short straight crossguard, and a pommel with lobes. Total length is usually close to 90 cm and weight around a kilogram. The grip is short — a hand and a little more — because the sword was used with a shield and a single hand.

The wide fuller is the feature most often missed in reproductions. It is not a groove for blood; it is a way of removing weight from the middle of the blade while keeping the edges and the spine stiff. A blade with a shallow, wide fuller feels alive in the hand; a blade with a narrow deep groove feels dead and looks wrong from any distance.

Petersen's twenty-six types

In 1919 the Norwegian archaeologist Jan Petersen published a typology of Viking swords based on hilt form: pommel shape, guard shape and the proportions between them. It runs through the alphabet from A to Z and remains the working language of the field — the Petersen typology is still how Viking hilts are catalogued. A “Type S” sword, for example, is dated by its five-lobed pommel and straight guard, not by its blade.

This is why specialists talk about hilts when they date a sword. Blades were traded, re-hilted and repaired; hilts were made locally and changed in style generation by generation. The hilt is the clock.

Viking sword hilt from Skaun, Norway
A Viking-Age hilt from Skaun, Norway. The upper guard and pommel are the dating evidence: their profile, the number of lobes and the way they meet the grip place the sword within Petersen's typology. (image: Åge Hojem, NTNU Vitenskapsmuseet, CC BY 2.0)

Pattern welding: what the blade actually is

Pattern-welded blade, modern reconstruction by Ejvind Nørgård
A modern reconstruction of a pattern-welded blade. The swirling figure is the signature of a twisted composite core — a technique used in the Viking Age and reproduced today by smiths working from the same logic. (image: Niels Provos, CC BY-SA 4.0)

A pattern-welded sword is built from bundles of iron and steel rods, twisted, welded together and forged into a core, with harder steel welded on for the edges. Many Viking-Age blades were made this way, and the result is a visible figure in the surface and a tough, flexible body behind a hard edge.

It is not Damascus steel, and it is not a magic material. It is a sensible way of making a long blade from inconsistent raw iron: the composite averages out the weaknesses, and the twisted core gives a stiffness that a single bar of the same weight would not have. Modern smiths reproduce it because the pattern is beautiful and because the process teaches you how the original was built.

Ulfberht and the myth of the magic sword

Some Viking-Age blades carry the inscription +VLFBERH+T or a variant. They are usually better steel than their neighbours, sometimes made from crucible steel with a carbon content that Europe could not produce consistently at the time. They were also copied: many blades carry the name without the quality.

The result is a genuine phenomenon wrapped in a modern myth. The Ulfberht blades are remarkable for their metallurgy and their trade routes. They are not lightsabers, and a well-made ordinary blade in good condition was not meaningfully inferior in the hands of a trained man.

What graves tell us

Double-edged sword from a grave at Birka
A double-edged sword from a grave at Birka. The blade is corroded into a solid mass, but the silhouette — wide fuller, straight guard, lobed pommel — is still readable after a thousand years in the ground. (image: Christer Åhlin, CC BY 2.5)

Swords are among the most common weapons in Viking-Age graves, and they were buried with a small set of accompanying objects: shield, spear, sometimes an axe. Many blades show deliberate damage — bent, broken or heated — which is usually interpreted as part of the burial rite rather than battle damage.

Scabbards rarely survive, but their fittings do: chapes, buckles, strap distributors. A sword in a grave was a dressed object, hung from a belt system, not a bare blade dropped into a pit.

Viking-Age sword from Derby Museum
A Viking-Age sword in Derby Museum, corroded to a crust. What survives of most of these blades is iron oxide and the shape of the hilt; the edge, the fuller and the pattern are reconstructions from X-rays and from a handful of better-preserved pieces. (image: Roger from Derby, UK, CC BY 3.0)

Making one at 1:6

A 90 cm sword becomes 15 cm. At that size the fuller is a groove about 0.4 mm wide, and cutting it with a ball burr leaves a rounded channel that looks like a scratch. We cut the fuller with a ground chisel, then polish the edges of the groove so it has a defined shoulder on both sides — the feature that makes a fuller read at a glance.

The hilt is where a miniature either works or does not. A five-lobed pommel at 1:6 has lobes about 1.5 mm across. If they are cast as one blob, the sword looks like a letter opener; if they are filed individually, the highlights fall the way they do on the original.

A look at the Ulfberht blade and the metallurgy behind it, including experimental work on how such clean steel could have reached the Viking world:

Reading one in a case

Look at the hilt first and try to place it in Petersen's alphabet. Then check the fuller: wide and shallow, running most of the blade. Then look at the tang and the way the hilt is assembled — riveted, wedged, or both. The blade may be an import, the hilt may be local, and the fittings may be later; a Viking sword is often three objects assembled over a century.

For the armour and shields that went with it, see our guide to the Viking helmet; the Museum of Cultural History in Oslo and the Met's Arms and Armor collection both hold representative groups.

What is a Petersen type?

A classification of Viking sword hilts published by Jan Petersen in 1919, running from Type A to Type Z and based on pommel and guard shape.

Were Viking swords pattern-welded?

Many were. Twisted bundles of iron and steel were welded into a core with harder steel edges, producing both a visible figure and a tough blade.

Is an Ulfberht sword a Viking sword?

It is a blade with a Frankish-style inscription found in Norse contexts, often made of crucible steel. Many are imports; many inscriptions are later copies.

Keep reading in the Miniature Armor Library

Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.


The Viking sword is a European object with a Norse biography. Once the hilt is read as a date and the fuller as engineering rather than decoration, the sword stops being a symbol and becomes a very specific piece of ninth-century technology — one that happened to be buried with its owner, which is why we can still study it.

Pieces in this guide

MA
Hong Kong Miniature Armor Co. Ltd.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.

Join the Discussion

Have a question, correction, historical reference or collector insight? Join the discussion below.

Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.

No replies yet

Be the first to add a question, a correction or a collector insight about this topic.

Post a Reply

Replies use Shopify's native article comments — nothing is stored outside your store.

Your email is never published.

Your comment will appear after review.