Viking swords explained: blade proportions, the wide fuller, Petersen's hilt typology, pattern welding, Ulfberht steel, and what graves actually pr...
EuropeanSwords
Bastard Sword vs Longsword: Key Differences & Historical Facts
Bastard sword and longsword are two names for overlapping parts of one family, and the line is drawn at the grip. Grip length, blade section, weight and the surviving fencing manuals — plus what to check on a 1:6 miniature.

Contents
By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026
The 1:6 knight in the figure below stands about a hand's width tall, and the two-handed sword at his side is 15 to 18 centimetres of blade on a grip long enough for both fists — the proportions this whole guide is built to test. The miniature is the argument made physical.
What you will be able to check by the end is whether a longsword reads as a longsword at 1:6, using the one dimension that does not lie: grip length against blade, and a balance point a few millimetres in front of the guard.

Where the names come from
"Longsword" is the descriptive one: a sword long enough that you grip it with two hands (Langschwert in German, spada longa in Italian). "Bastard sword" is the odd one, and it is older than most people expect — the term appears in fifteenth-century texts as a sword of uncertain or mixed form, neither a single-hander nor a true two-hander. In French the same idea shows up as épée bâtarde. The Victorians, who loved a label, hardened it into a category, and "hand-and-a-half" came along to describe the same thing in plain English.
What the surviving swords show is a continuum. Blade lengths run from around 75 cm up to 110 cm and beyond; grips run from snug to roomy; nothing in the archaeological record sorts itself neatly into "bastard" and "longsword" piles. The typology collectors lean on instead — Ewart Oakeshott's blade types and pommel forms — describes shape and period, not the number of hands. That is why a well-made reproduction should be judged on proportions, not on which of the two names the listing uses.
Grip and pommel: the real dividing line
Lay the two side by side and the hilt tells you everything. A longsword's grip is long enough for two hands with space to slide: one hand at the guard, one at the pommel, and you can let the lower hand travel towards the pommel during a cut to add leverage. A bastard sword's grip is shorter — room for two hands if they crowd, or one hand with a finger hooked over the guard. Put it in your hand and the difference reads instantly: the longsword wants both hands all the time, the hand-and-a-half sword is happy either way.
The pommel is the counterweight. On a well-balanced reproduction, the pommel and the tapering blade work as a pair, pulling the point of balance back to a few centimetres in front of the guard. That is what makes a 1.4 kg sword feel light in the hand — and it is the first thing to check on a miniature, where a fat, heavy pommel is the classic shortcut.

Blade length, taper and cross-section
Blade length overlaps so heavily between the two names that it is a weak way to tell them apart. What matters far more is section. A sword built for the thrust carries a stiff diamond or lenticular section that narrows sharply to a point; a sword built for the cut carries a broader, flatter blade, sometimes with a fuller running down the centre to take out weight without losing stiffness. The same armourer's shop turned out both, and a knight's choice of one over the other was about what he expected the fight to be, not about vocabulary.
For a collector looking at a miniature, the honest test is proportion: a two-handed sword should look long because the grip is long, not because the blade has been stretched while the hilt stayed single-handed. On a 1:6 piece, a blade of roughly 15–18 cm with a proportionally long grip is what "correct" looks like on the shelf.

How they were actually used
The manuals are the best evidence we have, and they are unusually generous. Fiore dei Liberi's Fior di Battaglia, written around 1409, and the Liechtenauer tradition recorded from the late 1300s teach the two-handed sword through the same core plays: the strike, the winding, the thrust, and half-swording — sliding your leading hand up onto the blade to steer the point with precision, or to turn the sword into a short, rigid lever in armoured combat. Talhoffer's 1467 manuscript shows those plays in a judicial duel, both fighters in plate.
Two things about that material are worth carrying into how you look at swords. First, one-handed use keeps appearing: in armour, with a shield or buckler, or mounted. That is exactly where a hand-and-a-half hilt earns its keep, and it is a large part of why the shorter-gripped swords existed at all. Second, these are not ponderous weapons. Modern measurements of surviving swords cluster well under 1.8 kg, and a two-handed blade with a properly drawn hilt moves quickly. The Victorian image of a sword you could barely lift is a myth that miniature makers still repeat when they make hilts too fat and blades too thick.
Blade length and grip decide how a sword moves. Watching a two-handed sword handled next to shorter blades is the fastest way to internalise the point of the whole bastard sword vs longsword question.

What the museums show
If you want to train your eye, look at originals. The Royal Armouries collection publishes photographs and measurements for two-handed swords across three centuries, and The Wallace Collection in London holds European swords with the hilts intact — guards, grips and pommels exactly as fitted. Compare grip-to-blade ratios there, then compare them with a miniature. The gap between a proportioned reproduction and a stretched one becomes obvious within a minute.
The hilt we actually finish
A real two-handed grip runs about 26 centimetres, and at one-sixth that is 26 ÷ 6 ≈ 4.3 centimetres. That hilt length is what makes a 1:6 longsword read as a two-hander rather than a single-hand sword, and it is the dimension we hold to first: shorten the grip and the whole weapon lies about its name.
The failure mode is the pommel, the classic shortcut. A fat, heavy pommel on a small blade drags the point of balance back past the guard, so the piece feels dead instead of lively. The fix is to draw the pommel to match the tapered blade, keeping the balance a few millimetres in front of the guard — the same few centimetres a 1.4-kilogram original carries.
The judgement call is the label. We do not fix a piece as a 'bastard sword' or a 'longsword' by the listing word; we judge it on grip-to-blade ratio, because the historical names overlap. A 1:6 sword is correct when its proportions match the original, whatever the shop title says.
Buying the miniature version: five things to check
One. Grip length relative to blade — the hilt should look like it fits two hands. Two. Pommel weight and shape, matched to the blade's taper. Three. Blade section, not just outline: a real diamond or lenticular section with a straight spine reads as a sword, a flat plate reads as a toy. Four. Metal where metal belongs — brass or steel fittings, a scabbard throat that lines up, a guard that sits square on the shoulders. Five. Scale discipline: at 1:6 the whole figure should be roughly a hand's width tall, and the sword should measure against it the way the original measures against a person.
Pieces shown in this guide
- 1/6 Scale Medieval European Knight Armor Figurine with Sword — $159 · Full harness with a two-handed sword — the longsword in context
- Medieval Knight Great Helm - Engraved Faceplate - 135mm Bust — $45 · Great helm with engraved faceplate — the crusading-period companion piece
- Medieval Bascinet Helmet - Pivoted Visor with Perforations - 135mm — $45 · Bascinet with side-pivoted visor — the 1400s helmet the manuals were written for
- Medieval Bascinet Helmet - Pointed Snout Visor - 135mm Bust — $45 · Hounskull snout visor — the same period, a longer sight line
- Medieval Knight Gorget & Plackart - 135mm Armor Bust — $45 · Gorget and plackart — what protected the neck and chest when the helm came off
- 190mm Medieval European Knight Full Plate Armor Bust Figurine — $99 · 190mm full-plate bust — helmet, gorget and breastplate as one object
- 190mm Medieval European Knight Full Plate Armor Bust Figurine — $139 · The same bust in the larger 190mm build — more plate detail per centimetre
- 165mm European Knight Helmet Model Bust Replica — $85 · 165mm European knight helmet bust — a compact pair to the full figure
- Medieval European Knight Helmet Model Bust Replica — $69 · European knight helmet bust — the single-piece entry point
- Medieval European Knight Helmet with Red Plume Picture Frame Decor — $119 · Helmet with red plume in a picture frame — the shield-and-plume display format
- Medieval European Knight Armor Picture Frame Decor — $129 · Knight armour picture frame — armour as wall display
- 1:6 Scale Tang‑Han Dynasty Ring‑Pommel Sword — $89 · Tang–Han ring-pommel sword — a single-hand hilt for comparison
- 1:6 Chi-Dragon Han Jian — Miniature Display Sword — $99 · Chi-Dragon Han Jian — a double-edged blade from another tradition entirely
- 1:6 Wakizashi - VG10 Blade with Ebony Scabbard — $52 · Wakizashi in VG10 — grip length as a design decision, read Japanese
- 1:6 Scale Rosewood Display Stand for Fine Miniature Swords — $49 · Rosewood display stand — how to present a blade at 1:6 without a scabbard

One last note on framing your own collection: a two-handed sword makes most sense next to the armour it was used with. Pair it with a helmet of the same period — a great helm for the crusading century, a bascinet with pivoted visor for the 1400s — and the whole set starts to read as one moment in history rather than a pile of objects.
FAQ
How do I tell a bastard sword from a longsword on a miniature?
By grip length against blade, not the name. A real two-handed grip is about 26 centimetres, so at 1:6 it should be roughly 4.3 centimetres — long enough for both fists. Shorten the grip and the sword lies about being a two-hander, whatever the listing says.
Why does my miniature sword feel dead in the hand?
A fat, heavy pommel drags the balance back past the guard, so the piece feels lifeless. The fix we use is to draw the pommel to match the tapered blade, keeping the balance a few millimetres in front of the guard, as a 1.4-kilogram original does.
How do I check a sword's balance at home?
Rest the blade across a pencil with the edge level and slide until it tips; that mark is the balance point. On a well-made 1:6 sword it sits just in front of the guard. If it sits at the tip, the distal taper was skipped and the sword is nose-heavy.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.
Keep reading in the Miniature Armor Library
- Bastard Sword vs Longsword: Key Differences and Historical Facts
- Medieval Helmet Evolution: From the Great Helm to the Bascinet
- Jian vs Dao: How Chinese Swords and Sabers Actually Differ
- Chinese Armour: From the Terracotta Army to the Qing Court
- Japanese Armour: From the Heian Court to the Edo Peace
- How a Miniature Armour Piece Is Made
Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.
Join the Discussion
Have a question, correction, historical reference or collector insight? Join the discussion below.
Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.
No replies yet
Be the first to add a question, a correction or a collector insight about this topic.
From the workshop
Related Miniature Collectibles
Hand-picked reproductions connected to this topic. Use the related_products metafield to choose them per article.
