An open Roman face, a Chinese neck guard and a closed European visor are three answers to the same question. What each protects, what each gives up...
EuropeanHelmets
Helmet Encyclopedia: From the Corinthian to the Kabuto
The one piece of equipment that carries its period in silhouette. Spangenhelm to morion, Montefortino to ridge helm, dou mou to kabuto — the types, the anatomy, and seven checks for a helmet miniature.

Contents
By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026
Twelve helmet busts stand on the shelf above the packing bench, and the one that falls over is always the tallest. Not the heaviest, not the widest — the tallest. That is the first lesson of building helmets at reduced size, and it has nothing to do with the history in this encyclopedia. It is a base-radius problem.
The second lesson is that a helmet is the only piece of armour whose entire silhouette is a date. Change a visor and you have moved a century. What follows is the reference by type and tradition, and then the parts of that reference that survive the shrink to 1:6 — where the visor slots close up, where the paint goes, and what makes a bust stand still.

The European line
European helmet design is a four-century argument between protection and awareness, and it never settles — it just keeps trading one for the other. The great helm protected everything and left its wearer half blind and half deaf; the bascinet gave back vision at the cost of the face; the sallet and armet tried to have both and charged accordingly.
| Helmet | Dates | Defining feature |
|---|---|---|
| Spangenhelm | c. 500–1000 | Segmented bowl riveted to a frame; cheap and quick to build |
| Nasal helm | c. 900–1200 | Conical bowl with a nose guard; the Norman signature |
| Great helm | c. 1200–1400 | Full face coverage, tiny sight and breath openings |
| Sugarloaf helm | c. 1300–1400 | A great helm with a conical top to shed blows |
| Bascinet | c. 1300–1450 | Pointed skull, mail aventail, optional visor |
| Hounskull | c. 1380–1420 | "Dog-faced" pointed visor — the pig-face helmet |
| Kettle hat | c. 1200–1500 | Wide brim; the infantry and archer's helmet |
| Sallet | c. 1440–1520 | Swept tail covering the neck; excellent vision |
| Armet | c. 1420–1550 | Fully enclosed, hinged cheek plates; elite harness |
| Barbute | c. 1400–1500 | Italian open-face, with a Y or T opening; classical revival look |
| Morion | c. 1550–1650 | Combed crest and swept brim; the conquistador silhouette |
Two notes that photographs hide. First, the great helm was usually worn over a smaller helmet — a skullcap, then a bascinet — and a knight typically took the great helm off after the first clash of lances, which is why the undershell mattered as much as the outer one. Second, the kettle hat deserves more respect than it gets: cheap, ventilated and effective against the arrow and the sword stroke that came from above, it protected more men, for longer, than any knightly helmet ever did.

The Roman line
Rome's helmets are less about fashion than about supply. As the legions standardised, so did the helmet, and what changed was the balance between the foundry's capacity and the soldier's neck. The large neck guard of the Imperial Gallic type exists because a legionary's greatest threat in a melee came from behind and above.
| Type | Period | Recognition |
|---|---|---|
| Montefortino | 4th–1st c. BC | Round bowl, knob or plume holder on top, no neck guard |
| Coolus | 3rd–1st c. BC | Toward a hemispherical bowl, with a small brow reinforce |
| Imperial Gallic | 1st c. AD | Large neck guard, broad cheek pieces, embossed "eyebrows" |
| Imperial Italic | 1st–3rd c. AD | The same idea in a plainer, often cross-braced form |
| Ridge / spangenhelm | 3rd–5th c. AD | Two halves joined at a ridge; the late Roman answer to cost |
The cheek pieces are the detail to look at. They are hinged and carry the helmet's identity: wide and embossed on a Gallic type, plainer and more angular on an Italic. On a miniature, the cheek piece is also where a maker's standard shows, because it is a small separate piece that has to hang correctly rather than be moulded into the bowl.

The East Asian line
Chinese and Japanese helmets take a different route for a different tactical problem. Japan's kabuto is built from riveted plates and laced lamellar, and its most distinctive features — the shikoro neck guard that flares like a skirt and the maedate crest on the brow — are as much about identifying the wearer as protecting him. A samurai helmet is a name tag as well as armour, and the crest is the largest, most visible rank signal in the history of military dress.
China's helmet history runs from the bronze zhou of the Shang and Zhou dynasties through the lamellar dou mou of the Han and Tang to the elaborate ceremonial helmets of the Ming and Qing courts. The phoenix-wing general's helmet and the golden dragon helmet are court pieces: their wings and dragons are rank, not defence. Placed next to a Ming general's helmet, a phoenix-wing helmet and the Qing imperial golden dragon helmet make the transition visible in three objects.

Anatomy of a helmet
The words repeat across cultures, which is a useful thing to know when reading listings. Bowl or skull: the main shell. Brow reinforce: the extra band above the eyes. Cheek piece: hinged or riveted side plate. Neck guard: the rear extension, large on Roman and Japanese helmets. Aventail or shikoro: the hanging curtain of mail or lames protecting throat and neck. Visor: the movable face plate, hinged at the brow (klappvisor) or at the sides. Bevor: the chin plate on an enclosed helm. Crest or maedate: the ornamental top or brow piece. Plume holder: the socket for a feather. Lining rivets: the row of small rivets that held the leather suspension inside — and the detail that most reproductions omit, leaving an interior that no real helmet ever had.
A six-helmet walk-through — great helm, nasal helm, bascinet, kettle hat, sallet and armet — that follows exactly the trade-offs this page describes: protection bought with vision, vision bought with exposure.
Reference shelf
The Met's Arms and Armor department is the best single online reference for the European line, with the interior and the lining rivets visible on many records. For the Japanese material, the Smithsonian's samurai armour records are worth the visit, particularly for how the shikoro lacing is constructed — a detail that separates a serious kabuto reproduction from a decorated pot.

Weight, base and the tipping point
A real helmet is carried by a neck, a spine and two shoulders, which is why two and a half kilograms of steel on a head is a fatigue problem rather than a balance problem. A bust has none of that. It has a stem and a base, and the mass sits at the top of the stem like a coin balanced on a pencil.
The number we work to is simple enough to check on any shelf: the radius of the base should be at least a fifth of the total height, more if the helmet overhangs forward. A 135 mm great helm therefore wants a base no smaller than about 27 mm across the half-width, and a 190 mm bust wants closer to 40 mm. Below that, a nudge from a vacuum cleaner tips it, and the fall is always onto the visor.
Two other things happen at this size. Breath holes and visor slots — 4 to 6 mm on the original — come out at around half a millimetre, which a normal primer coat will bridge and close. We mask them, spray, then reopen each one with a pin, because a great helm with filled holes reads as a solid block and loses the one detail that tells you it is a fighting helmet rather than a bucket.
And the brow band is where a cheap casting shows itself. On a real helmet that band is a separate reinforcement riveted over the edge; at 1:6 it is 0.4 mm of material. If the mould rounds it off, the helmet photographs as a soft dome no matter how accurate the profile is. We keep that edge crisp and leave the rivet heads proud — two details that cost minutes and decide whether the object reads as armour.
Seven checks for a helmet miniature
One: the opening. Sight and breath openings should be small, regular and cut — not drilled as round holes at random. Two: the visor. If there is one, it should pivot, and the pivot should be a pin through a plate, not a moulded bump. Three: the interior. A helmet with a flat solid interior is a shell; a real one has a lining band and rivets. Four: the shape of the bowl. Compounded curves and a slightly irregular planish are right; a perfect sphere or a machine-smooth cylinder is wrong. Five: the fit to the shoulders. On a bust or figure, the helmet should sit on a gorget or a padded coif, not float on the neck. Six: surface. A uniform high gloss is a modern finish; period steel is polished but not mirror-flat everywhere. Seven: the crest if present. It should be attached the way the original was — pinned, slotted or riveted — not merged into the bowl.
Scale changes the emphasis again. A 120mm Roman infantry helmet bust is judged on the shape of the neck guard and the cheek pieces; a 165mm knight's helmet with a plume is judged on the profile and the finish. Our 120mm Roman infantry helmet and 165mm medieval knight helmet are both useful reference points for what is achievable at each size.
Reference helmets across the traditions
- Medieval Knight Great Helm - Engraved Faceplate - 135mm Bust — $45 · The great helm — protection with the visor closed
- Medieval Bascinet Helmet - Pointed Snout Visor - 135mm Bust — $45 · Hounskull visor — the face bought back
- Medieval Bascinet Helmet - Pivoted Visor with Perforations - 135mm — $45 · The same bascinet with a pivoted visor
- 120mm Ancient Roman Infantry Helmet Model Bust Replica — $88 · Roman infantry helmet — neck guard and cheek pieces
- 135mm Ancient Roman Centurion Helmet Model Bust Replica — $95 · The centurion's version — rank on the bowl
- 130mm Ancient Roman General Helmet Model Bust Replica — $89 · Roman general's helmet — the crest as command signal
- 170mm Ancient Roman Gladiator Helmet Bust Replica with Display Base — $129 · Gladiator helmet with display base — arena rather than battlefield
- 120mm Spartan Winged Lion Helmet Model Bust Replica — $89 · Greek helmet with crest — the Mediterranean alternative
- 130mm Spartan Black Dragon Helmet Model Bust Replica — $99 · A second Greek form in a darker finish
- 155mm Ming Dynasty General Helmet Bust Replica — $69 · Ming general's helmet — court rank in the design
- Phoenix-Wing General's Helmet - 155mm Resin Display Piece — $46 · Phoenix-wing helmet — the wings are identity, not armour
- Qing Imperial Golden Dragon Helmet - 218mm Display Piece — $40 · Qing imperial dragon helmet — the largest statement of all
- 165mm Medieval Knight Helmet Model Bust Replica — $119 · 165mm knight's helmet — size to judge profile and finish
- Medieval European Knight Helmet with Red Plume Picture Frame Decor — $119 · Helmet with plume in a display frame — the crest tradition in European dress

One closing observation. Helmets are the part of armour that people actually want to own, and the reason is not protection. A sword is a tool and a suit of armour is a machine, but a helmet is a face — it is the only piece of equipment that carries a personality, which is why the great helm looks grim, the bascinet looks cunning and the sallet looks professional. If you are building a display, the helmet is what the eye lands on first. Choose it as carefully as you would choose the figure beneath it.
FAQ
Why does my helmet bust tip over so easily?
Because the mass sits high and the base is small. As a rule of thumb the base half-width should be at least a fifth of the total height. A disc of museum putty under the base fixes a shelf that is level; a wider plinth fixes the geometry.
Are the visor slots on a 1:6 helmet real openings?
They should be. At 1:6 they are about half a millimetre wide, so they have to be masked during painting and reopened afterwards — a filled slot makes the visor read as a solid plate and loses the period cue entirely.
Should rivets be visible on a helmet miniature?
Yes, and they should stand slightly proud. Rivet lines are how a riveted bowl differs from a raised one, and at small scale they are the cheapest honest detail a maker can add.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.
Keep reading in the Miniature Armor Library
- Sword Anatomy: An A–Z Encyclopedia of Blade, Hilt and Scabbard
- Beyond the Sword: An Encyclopedia of Axes, Maces, War Hammers and Polearms
- Armour Anatomy: Every Plate, Part and Fastening, A–Z
- The Collector's Encyclopedia: Scale, Materials, Finishing and Display
- The Miniature Arms Glossary: Ninety Terms in Plain English
- Chinese Arms & Armour: A Dynasty-by-Dynasty Encyclopedia
Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.
Join the Discussion
Have a question, correction, historical reference or collector insight? Join the discussion below.
Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.
No replies yet
Be the first to add a question, a correction or a collector insight about this topic.
From the workshop
Related Miniature Collectibles
Hand-picked reproductions connected to this topic. Use the related_products metafield to choose them per article.


