ChineseHistorical Weapons

Beyond the Sword: An Encyclopedia of Axes, Maces, War Hammers and Polearms

The sword was what a man was buried with; the axe was what he was issued. A working encyclopedia of the axe, mace, war hammer, pick and flail, and the polearm family — spear, guandao, halberd and pike — with six checks for buying a hafted miniature.

1:6 scale Red-Tassel Dragon Spear miniature, encyclopedia of axes, maces, war hammers and polearms
1:6 scale Red-Tassel Dragon Spear miniature, encyclopedia of axes, maces, war hammers and polearms

By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026

The axe that comes back for repair most often is not the one with the thinnest blade. It is the one with the longest haft. A haft is a lever, and at 1:6 a lever 250 mm long with a steel head on the end will find every weak joint in the piece during a single journey in a courier van.

This encyclopedia covers the working end of the armoury — axe, mace, war hammer, flail, pick and the polearm family — and then the part of it that only shows up on a bench: how a head is fixed to a shaft, why that joint fails, and what to look at before you buy a hafted miniature.

1:6 scale Li Quan Spear of Yue Fei, brass-fitted miniature Chinese polearm
Start with the weapon that decided battles: a 1:6 Li Quan Spear, brass-fitted, in the Song-dynasty general's tradition. Reach, cheap steel, trainable in days.

The axe family

An axe is a lever with a wedge on the end, and everything about its design follows from that. The short haft gives speed; the long haft gives a two-handed blow that can split a shield; the shape of the head decides whether it chops, splits or hooks. Four forms come up again and again in collections.

Axe What defines it
Bearded axe The blade hangs below the eye, lengthening the edge without adding weight
Dane axe Two hands, long haft, crescent edge — an Anglo-Danish signature
Poleaxe Axe, hammer and spike on one head, with a butt spike — the knight's answer to the knight
Battle axe A general term; usually means a one-hand haft with a broad edge

The poleaxe deserves its own paragraph, because it is the weapon medieval armour actually produced. When plate became good enough that a one-handed sword could not reliably get through it, the answer was not a bigger sword but a different logic: a short haft with an axe head for the cut, a hammer or fluke for the concussive blow, and a spike on top for the thrust into a visor or an armpit. The bec de corbin and the lucerne hammer are the same idea in different dialects. On foot, in armour, against armour, this is what a professional carried.

The impact family: mace, hammer, pick, flail

Blunt weapons are the oldest and most honest answer to armour, because they do not need to defeat it — they transmit force through it. A sword cut has to sever; a mace blow only has to arrive. Padding, mail and even plate cannot absorb all of that energy, and the body underneath takes the rest.

Weapon Principle Where it was used
Mace Blunt mass on a short haft Universal. Cheapest answer to armour ever devised.
War hammer Concentrated impact on a small face European late medieval — a knight's saddle weapon.
Horseman's pick A curved spike that punches plate Eastern Europe and the steppe; also a cavalry tool.
Flail A swinging head on a chain — impact without recoil Central Europe, Hussite wars; feared more than it was effective.
Morning star A spiked head on a haft A modern collecting term as much as a historical one.

Two corrections to the popular picture. First, the spiked "morning star" is largely a collector's category: real maces are usually flanged or knobbed, and spiked heads are rarer than films suggest. Second, the flail is overrated in fiction and underrated in history for the opposite reason — it is a weapon for a specific Central European context, and its reputation owes more to later fantasy than to battlefield accounts.

What does not get mentioned often enough is that these weapons are cheap in steel and expensive in skill. A mace head is a lump; the difficulty is the haft, the socket and the balance. That is exactly why a good miniature mace or hammer is harder to find than a good miniature sword, and why they are worth looking at carefully.

1:6 scale Green Dragon Crescent Blade guandao miniature, Chinese heavy polearm
The heavy end of the polearm family: a 1:6 Green Dragon Crescent Blade. Note how much mass sits forward of the hands — that is the whole design.

The polearm family: reach as a system

If impact weapons answer armour, polearms answer the question of who gets to strike first. Reach is the whole argument, and every culture arrived at the same answer by a different road.

Weapon Length Function Tradition
Spear (qiang) 2–3 m Thrust, parry, formation Chinese
Guandao 1.8–2.5 m Heavy cutting; a commander's mark Chinese
Podao 1.5–2 m Working war blade, no ceremony Chinese
Halberd 1.5–1.8 m Point, axe and hook on one head European
Bill / glaive 1.8–2.4 m Cutting edge on a long haft European
Pike 3–6 m Formation weapon; arithmetic in a square European

The Chinese qiang is the purest expression of the idea: a light head on a long waxed shaft, issued in numbers, drilled until a line of them moved as one object. The guandao is the opposite extreme — a heavy cutting polearm associated with commanders and, in the popular imagination, with Guan Yu, whose name the weapon still carries. Between them sits the podao, a straightforward long-handled war blade with none of the ceremony.

Europe reached the same conclusions through the halberd, the bill and the pike. The halberd stacks three functions on one head — thrust with the point, cleave with the axe, unhorse with the hook. The pike turns reach into arithmetic: a hedge of points that no cavalry charge survives. The Swiss pike square of the fifteenth and sixteenth centuries made heavily armoured cavalry obsolete not by being better armed but by being better organised, which is the recurring lesson of the whole subject.

1:12 Qing Podao Kangxi era long-handled Chinese war blade miniature
The polearm without ceremony: a 1:12 Qing Podao, a Kangxi-era long-handled war blade. No tassel, no title, just a haft and an edge.

Why the sword still gets the museum wall

Because a sword is a piece of personal property and an axe is a piece of equipment. Swords were engraved, inlaid, named, inherited and buried with their owners; axes and spears were stacked in arsenals, issued, broken and replaced. The museum wall is a record of what survived, and what survived is what was valued — not what was used.

This matters for a collection, because it means the polearm and impact weapons are the honest complement to a sword display. Put a 1:6 Green Dragon Crescent Blade beside a Han jian and you have the two halves of a Chinese armoury: the officer's blade and the army's reach. Add a 1:6 Li Quan Spear and a Tang & Song weapons shadow box and the shelf stops being a set of objects and becomes a diagram of how a battle was actually fought.

A useful corrective to film logic: a historian scores dagger, axe, arming sword, two-handed sword, messer, flail, poleaxe, war hammer and mace on usability, damage and versatility — and the ranking is not the one popular culture would predict.

Reference shelf

Two sources worth keeping open. The Britannica entry on the halberd is the cleanest short account of how the three-function head developed and why it faded as firearms arrived. The Royal Armouries collection publishes European polearms and impact weapons with their heads, sockets and langets photographed separately, which is the only way to judge whether a miniature has understood how the head is actually fixed to the haft.

1:6 Black and Gold Ancient Blade dao miniature, Chinese single-edged display sword
The short end of the working armoury: a 1:6 Black & Gold Ancient Blade. What a soldier carried when the polearm was gone.

Where a hafted miniature fails first

On a real axe the head is driven onto a tapered haft and held by wedge, friction and sometimes a rivet through the eye. At 1:6 the haft is 4 to 5 mm in diameter and the eye wall of the head is under a millimetre. Friction alone is not enough at that scale, because the mass ratio is wrong: the head is proportionally much heavier than the wood is strong.

So we pin. A 0.8 mm brass pin passes through the head and the haft, gets a drop of epoxy, and is peened over on both sides. It is the same logic as the original wedge, done in a material that will not split when the wood is only four millimetres across. The pin is visible on close inspection and we do not hide it — a hafted piece with a hidden fixing is a piece that will rotate in the hand one day.

Balance is the second bench lesson. A mace or a war hammer carries its mass at the end of the lever by design; on a 250 mm miniature that means the centre of gravity sits around two-thirds of the way out, and the piece will not rest on a single-point stand. Every long-hafted item we ship goes out with a two-point cradle, one under the head and one under the butt, because the alternative is a sword stand with a polearm balanced on it and a dented shelf waiting to happen.

What this means for a buyer is one question: ask how the head is attached. A maker who can answer in a sentence — pinned, wedged, cast in one piece with the haft — has thought about it. A one-piece casting is honest too, as long as the head does not pretend to be a separate forging.

Buying an impact or pole weapon miniature

One: the haft. Wood should read as wood, with grain, and should taper. A perfectly cylindrical painted shaft is the most common shortcut. Two: the socket. A real head wraps or is socketed onto the haft and is pinned; a head simply butted against the end and glued will usually show a visible seam. Three: mass in the right place. An axe or hammer head should be visibly heavier than the haft, and the haft should be thicker where the hands go. Four: proportion to the figure. A two-handed polearm has to look like it needs two hands; if a 1:6 figure could swing it one-handed, the head is too small or the haft too short. Five: the butt. Real polearms usually have a butt cap or spike, and its absence is a tell. Six: the binding. Langets, rivets, cord wraps and tassels should be tight and positioned where they would actually protect the haft.

Scale is the practical question. A 1:6 polearm is a genuinely long object — a 1:6 Red-Tassel Dragon Spear is longer than most shelves expect — while the 1:12 Dragon-Courage Silver Spear sits comfortably next to a rosewood display stand without dominating it. Mixing the two scales on purpose reads as depth; mixing them by accident reads as a mistake.

Tang and Song dynasty weapons shadow box, framed miniature arms collection
A whole armoury in one frame: the Tang & Song Weapons Shadow Box, which is the practical way to show a haft, a blade and a fitting side by side.

A short glossary of hafted weapons

Haft: the shaft. Eye: the hole through an axe head where the haft passes. Socket: the tube on a spear or hammer head that fits over the haft. Langet: the metal strap running down the haft from the head, held by rivets. Butt cap: the metal shoe at the base of a haft. Fluke: the hammer-side or spike-side of a poleaxe head. Bec de corbin: "crow's beak" — a hammer and curved spike combination. Poll: the blunt back of an axe head. Beard: the part of an axe blade that hangs below the eye. Spike: the top of a poleaxe, for thrusting. These ten words cover most of what a listing will try to describe in a paragraph.

Pieces that carry a haft

Complete general armor and weapon set, miniature collector display with polearm
The command context: a complete general's armour and weapon set, where the heavy polearm sits beside the rank that carried it.

One closing thought on why this category exists in a shop that also sells swords. A blade tells you what one man was worth. A haft tells you what an army could afford. If you are building a display that is meant to say something about how wars were actually fought, put at least one polearm or impact weapon at the centre of it — a 1:12 Qing Podao, a 1:6 Black & Gold Ancient Blade, or a complete general's armour and weapon set that puts the whole kit in one frame.

FAQ

Why do axe and mace heads come loose on miniatures?

Because the joint relies on friction at a scale where the head is proportionally heavier than the haft is strong. A pin through head and haft, peened over, is the reliable fix.

Can a polearm miniature stand on a normal sword stand?

No. A hafted piece carries its mass at the far end, so it needs two points of support — one under the head and one near the butt. A single cradle lets it rotate and eventually fall.

Is a one-piece cast haft acceptable?

It is honest if it is described as one piece. What you want to avoid is a cast haft finished to look like wood with a separate head, because then the seam is a paint line rather than a joint, and it will fail at the seam.

MA
Hong Kong Miniature Armor Co. Ltd.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.

Keep reading in the Miniature Armor Library

Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.


Join the Discussion

Have a question, correction, historical reference or collector insight? Join the discussion below.

Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.

No replies yet

Be the first to add a question, a correction or a collector insight about this topic.

Post a Reply

Replies use Shopify's native article comments — nothing is stored outside your store.

Your email is never published.

Your comment will appear after review.