ChineseArmor

Armour Anatomy: Every Plate, Part and Fastening, A–Z

Gorget, pauldron, besagew, plackart, tasset, poleyn, sabaton — what every plate of a harness is called and what it does, how mail, scale, lamellar, brigandine and plate differ, and eight checks for judging an armour miniature.

190mm medieval European knight full plate armour bust, armour anatomy and parts encyclopedia
190mm medieval European knight full plate armour bust, armour anatomy and parts encyclopedia

By Hong Kong Miniature Armor Co. Ltd. · Last updated October 2026

A 135 mm gorget-and-plackart bust is under the loupe on my bench, and the customer's question is why there is a gap at the armpit. There is supposed to be one. Plate armour is a set of overlapping shells, not a cast torso: the gap is where the arm moves. A reproduction that closes it has made a sculpture of a harness.

Nobody wore plate armour from head to foot for most of the Middle Ages, and almost nobody wore a full harness in the field. What survives in museums is the top of the market, which is why the armour in our heads is shinier, more complete and more uniform than the armour that won battles. A professional soldier in 1450 wore a mix — plate where it paid, mail where it had to move, padded cloth underneath both.

This page is a glossary of armour by part and by construction: what each plate is called, what it covers, how the different families were built, and what the names let you judge on a miniature knight, bust or figure. Where Chinese and Japanese traditions use their own words, both are given.

190mm medieval European knight full plate armour bust figurine, armour anatomy reference
The reference harness: a 190mm medieval European knight in full plate. Work down it with the table above — gorget, breastplate, plackart, fauld, tasset — and the overlap logic becomes obvious.

Anatomy, from the collar down

Plate armour is an engineering problem in three parts: cover the body, let it move, and make each piece sit on the one below it. That last rule — overlap — is why armourers talk about a harness rather than a suit, and why a reproduction that casts the torso and the skirt as a single piece looks wrong even to someone who cannot name the fault.

Part Protects What to look for
Helm Head A pivot or hinge for the visor; a lining rivet line
Gorget Throat and neck Two halves, front and back, overlapping at the sides
Pauldron Shoulder and upper arm Lames that articulate; a strap and buckle, not a moulded lump
Besagew Armpit The small disc most reproductions omit entirely
Rerebrace / vambrace Upper arm / forearm Two pieces with a joint between them, not one tube
Couter Elbow Usually a separate piece with its own strap
Breastplate / plackart Chest / lower torso The plackart overlaps the breastplate, and does not merge with it
Fauld / tasset Waist / hips and thighs Tassets hang and move; they are not cast as part of the skirt
Cuisse / poleyn / greave Thigh / knee / shin A poleyn should have a side wing — that wing is the tell
Sabaton Foot Lames that follow the shape of the foot; usually blunt-toed

The gorget and the besagew are worth singling out, because they are the two parts most often omitted. The gorget is the piece that makes the helmet wearable: it carries the weight of the helm on the shoulders instead of the skull. The besagew covers the one opening a harness cannot close, the armpit. If a miniature has a gorget that actually sits under the helm, the maker was working from a real harness rather than from a heroic illustration.

Note the naming drift: the same plate can be called different things in different catalogues. The upper arm is a rerebrace in most English usage and a brassard in French; the skirt plates are fauld above and tassets below. Collectors should not treat vocabulary as fixed — museums disagree with each other. What is fixed is the physical logic: every plate is beatable from one direction and open from another.

Medieval knight gorget and plackart 135mm armour bust, plate armour parts
The two parts most often missing, isolated for inspection: a 135mm gorget and plackart bust. This is where a harness carries its weight, and where a reproduction usually simplifies.

Mail, plate and everything between

The progression from mail to plate is usually told as a story of improvement. It is better described as a story of cost. Mail is slow to make, flexible, repairable and good against cuts; plate is faster to fit to one wearer, better against impact, and expensive to articulate. Neither ever replaced the other completely, and most armies used both, plus scale, lamellar and brigandine where those were cheaper.

Type Construction Period and place
Mail (hamata) Interlinked rings, riveted or butted Roman and medieval Europe; the default for a thousand years
Scale (squamata) Small plates laced in overlapping rows Roman, Byzantine, Central Asian
Lamellar Plates laced to each other in horizontal bands China, Japan, Korea, the steppe
Brigandine Plates riveted between layers of cloth or leather Late medieval Europe; the working soldier's armour
Plate Fitted, articulated steel covering the body Europe from the fourteenth century; the expensive exception
Laminar Horizontal bands riveted to leather, sliding on each other Roman lorica segmentata — the classic case

The Chinese tradition went a different way and stayed there longer. Lamellar — overlapping plates laced together in bands — appears from the Han period and answers the same set of problems with lacing instead of rivets, which makes it easier to repair in the field and heavier to wear. It is also, in our experience, harder to reproduce well at miniature scale: a laced band can be cast as a textured strip, and most cheap reproductions do exactly that. A convincing lamellar skirt has visible plate edges and visible lacing, not a corrugated finish.

Song Dynasty general in armour 195mm full-height figure, Chinese lamellar armour
The other engineering tradition: a Song general in armour at 195mm, where the defence is built from laced plates and skirts rather than fitted steel.

The same parts in Chinese and Japanese

Japanese armour has the most precisely named parts of any tradition, and because the pieces were laced rather than riveted, the names survive intact. The kabuto is the helmet, menpō the face guard, dō the body armour, sode the shoulder guard that hangs from the back rather than sitting on the shoulder, kote the armoured sleeve, haidate the thigh guard, suneate the shin guard. A Japanese harness hangs rather than encloses, which is why it looks so different from European plate while solving identical problems.

Chinese armour is named by piece and period rather than in a single surviving vocabulary. The zhoujia of later dynasties is a brigandine-like coat of plates; the dengjia is leather or paper lamellar; the shanwenjia is mountain-pattern scale. A Song general in armour at 195mm and a European knight bust are useful to place next to each other: same problem, two different engineering traditions, neither one obviously better.

The best single corrective to what most of us believe about armour: where muscle cuirasses, shining white armour, villainous black armour and studded leather actually came from, and why real harnesses were far more mobile than film allows them to be.

Reference shelf

The Metropolitan Museum's Arms and Armor department publishes European harnesses with weights and dimensions, and has digitised enough pieces to compare articulation directly. The Royal Armouries is the better reference for the working end of the subject — brigandine, jack, gauntlet and gorget — which is the part that actually tells you how ordinary soldiers were equipped.

210mm Roman centurion warrior armour bust replica with gladius and shield
Mail, scale and plate in Roman service: a 210mm Roman centurion bust with gladius and shield, showing the layered approach Rome used for eight hundred years.

What scale does to a harness

At 1/6, armour can still be armour. The fauld overlaps the tassets, the rivets are real, the straps buckle, and the plackart slides on the breastplate the way it should. That means the eight checks later on this page are literal: you can move the piece and see whether the joint works.

At 135–190 mm the rules change. A functioning gap at the armpit would be a weak point in a casting and a trap for paint, so most busts model the overlap as a step and the articulation as a shadow line. That is not cheating; it is what the scale allows. The question becomes whether the step is in the right direction and whether the shadow line is deep enough to read across a room.

Three faults show up again and again on our bench. The first is reversed overlap: a tasset tucked under the fauld, or a plackart sitting over the breastplate instead of under it. The second is a moulded torso with no gap at any joint, which reads as a statue wearing a breastplate. The third is a helm floating above the gorget, with the neck doing the work of a collar. All three are visible from a metre away once you know the parts.

Judging an armour miniature: eight checks

One: does it overlap in the right direction? Plates cover from the top down and from the centre out. A tasset tucked under a fauld is backwards. Two: is there a gap where a joint is? Real harnesses articulate; a solid moulded torso is a sculpture, not armour. Three: does the helm sit on a gorget? Not on the shoulders of an empty neck. Four: are the straps real? Leather straps and buckles with metal ends are the difference between a costume and a harness. Five: does the surface have planishing and patina, or an even gloss? A uniform mirror finish reads as a toy. Six: is the articulation consistent at the knees and elbows? Those are where reproductions fail first. Seven: is the figure wearing padding underneath? Armour over bare metal limbs is impossible. Eight: does the pose match the armour? A full harness cannot twist like a gymnast, and a piece that poses its knight like an action figure has told you what it is.

Scale changes the answers. At 1:6 there is room for articulation, straps and a visible gorget; at a 135mm bust there is not, and the honest comparison is surface, proportion and finish. A medieval knight gorget and plackart bust at 135mm is judged on whether the plackart overlaps the breastplate correctly, not on whether the arms move.

Complete general armor and weapon set, miniature collector display piece
The full harness as a single object: a complete general's armour and weapon set, useful for seeing how helmet, body armour and weapon were designed against each other.

A short armour glossary

Harness: a complete set of armour for one wearer. Almain rivet: a cheap, mass-produced half-armour. Lame: one strip or plate in an articulated section. Articulation: riveted sliding plates at a joint. Gousset: a small plate reinforcing a joint opening. Plackart: the lower breastplate covering the belly. Bevor: the plate below the chin on a closed helm. Aventail / camail: the mail curtain hanging from a helmet. Hauberk: a mail shirt to the knee. Jack: a layered cloth defence. Rondel: a disc on a dagger or a besagew. Peascod: the pointed belly profile of late sixteenth-century armour. Twelve words, and most listings become readable.

Reference pieces for armour anatomy

Armored guardian general with lion shield 195mm display figure, decorative armour piece
Where armour becomes sculpture: an armoured guardian general with lion shield. A reminder that the same vocabulary covers ceremony as well as battle.

One closing note on what armour actually was. It was not a costume and it was not a status symbol first — it was insurance, bought by people who expected to be hit. That is why the same period produced a jewelled harness for a prince and a brigandine for a bowman, and why both are worth understanding as equipment. A complete general's armour and weapon set belongs next to a guardian general figure not because they match but because they show what the money bought at the top and what the army looked like below it.

FAQ

Does the gorget go under or over the breastplate?

The gorget sits at the neck as the base layer, and the breastplate's neck opening sits over it. On a miniature you should see a separate ring, not a collar cast into the chest. If the two are one piece, the maker has simplified away the part that lets the head turn.

What is the difference between a breastplate and a plackart?

The breastplate covers the upper chest; the plackart reinforces the lower torso and overlaps the breastplate from below. On a harness the plackart is the piece that takes a lance point at the waist, which is why it is often thicker and sits proud of the plate above it.

Why do tassets hang from the fauld?

The fauld is the skirt of lames at the waist; tassets hang from its lower edge to cover the upper thighs. Hanging them from the fauld, rather than from the belt, is what lets the whole assembly move together when the wearer walks or rides.

MA
Hong Kong Miniature Armor Co. Ltd.
The research and bench team behind miniaturearmor.com. We build 1/6 and 1/12 armour and weapons in our own workshop in Zhuhai — assembly, CNC and 3D printing under one roof — and every piece passes through our hands before it is packed. These notes come from the bench: fit, finish, rust, and the compromises scale forces on a design.

Keep reading in the Miniature Armor Library

Choosing your first piece: start with the Roman Helmets, Japanese Weapons, Chinese Armor & Weapons or European Armor collections. For long-term care, our care & maintenance guide covers cleaning and storage; and if a question needs a human, write to us — the team that answers is the team that packs your order.


Join the Discussion

Have a question, correction, historical reference or collector insight? Join the discussion below.

Please keep discussions respectful, relevant and historically focused. Spam, unrelated promotions and unsafe content may be removed.Community guidelines.

No replies yet

Be the first to add a question, a correction or a collector insight about this topic.

Post a Reply

Replies use Shopify's native article comments — nothing is stored outside your store.

Your email is never published.

Your comment will appear after review.